預購
本商品為預購商品。預計開始配送日 ~ (KST)
將於公告的預定配送日開始配送，商品出貨後物流公司將需要額外配送時間，配送完成時間根據訂單可能會有所不同。開始配送日根據商品及物流情況會有所變動，如有日期上的變更，將會另行通知。
購買者特典贈送活動進行中
登入後可確認是否能配送。
- 販售公告
- 各選項商品限購數量為5個。
商品公告資訊
- Product Name
- KEY CAP KEY RING
- Product material
- ABS 80% PVC 10% IRON 10%
- Size
- - [SUHO / COTTONEE] 4.6 X 4.2 X 2.1 (CM) - [LAY / BOB] 4.6 X 4.3 X 2.1 (CM) - [CHANYEOL / YEOLDAENGGGE] 4.6 X 3.9 X 2.1 (CM) - [D.O. / PINGUINNI] 4.6 X 4 X 2.1 (CM) - [KAI / NINI BEAR] 4.6 X 4 X 2.1 (CM) - [SEHUN / OHARI] 4.6 X 3.7 X 2.1 (CM)
- Contents
- KEY CAP KEY RING (1pc)
- Manufacturer (Importer)
- PHILKO INTERNATIONAL, INC.
- Country of manufacture
- CHINA
- Year and month of manufacture
- 2026.07
- Information that confirms that the product has been certified or permitted by law
- Not Applicable
- Precautions for handling
- [Product Warnings] - This product is intended for individuals aged 14 and above and should be kept out of reach of children. - Exchanges or compensation for this product can be processed in accordance with the Consumer Dispute Resolution Standards set forth by the Fair Trade Commission. - The actual product may slightly vary in color depending on your monitor settings. 1. Batteries are not included. 2. Once you place one CR1220 battery inside the keyring body and reassemble the product, the LED will light up. 3. Hold onto the gap next to the switch and pull it upward to separate the lower case from the switch. It can be removed more easily using a tool like a keycap remover. 4. Align the negative terminal of the battery with the brass contact and the positive terminal with the silver L-shaped contact. 5. If the LED fails to light up after inserting the battery, gently adjust the silver metal contact so it touches the battery firmly. 6. The keycaps can be detached from the keyring and are compatible with mechanical keyboards. They work with "+"-shaped switches, so please check your keyboard’s switch stem shape before purchasing. 7. Compatibility may be limited with non-contact switch keyboards or mechanical keyboards featuring special structures. 8. Due to the manufacturing process, minor scratches, dust, and spots may be present. 9. Due to the printing process, slight printing misalignment may occur.
- Quality assurance standards
- In accordance with relevant laws and the criteria for the settlement of consumer disputes
- 商品名
- KEY CAP KEY RING
- 企業名稱/法人代表
- Weverse Company Inc. / YANG ZOOIL
- 通訊販售業申報
- 2022-Seongnam Bundang A-0557
- 總機
- +82 1544-0790
- 電子郵件
- support@weverse.io
- 地址
- C, 6F, PangyoTech-onetower, 131, Bundangnaegok-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea
退換貨說明
- 注意事項
- 該商品販售給販售者所在國家/地區的居民，關於該商品的取消、退貨及付款等相關事宜將適用販售者所在國家/地區的政策。